Pipe & Drape Systems

Our pipe & drape equipment is easy to handle, quick to set up and take down without tools, and requires minimum storage space. It's perfect for traditional trade show use, a quick room divider, backdrop, or creative event decor. The popular Slip Fit System uses a pin that is attached to the base in any of up to three mounting holes. Set up only requires placing a base on the floor and slipping an upright over the pin. Just hook in your drape support and you're done. It's that simple.

Bases are available with or without Edge Protectors. Bases are industrial equipment and the raw edges are sharp. Edge protectors will help protect your hands while maneuvering the bases. The rubber edges will also help protect your non-carpeted floors.

Our Heavy duty 2" Tele-Uprights adjust in either precise 1 Ft. increments using our unique double button lock system or are fully adjustable using our New Locking Clamp. Every 2" Tele-Upright features a ruler attached to the inner piece to make adjustment quick and easy.Because of their 2" diameter they require Bases with 2" x 6" Slip Fit Pins. With our 2" Tele-Uprights we recommend using only our Super Heavy Duty 18" x 18" or 24" x 24" Slip Fit Bases.

The Drape Support is perhaps the most important component of the trade show booth. They must be rugged enough to stand up to repeated use, yet light enough to be easily handled. Construction of a Drape Support begins with our extruded, anodized aluminum tubes that are fabricated in our factory. Our cast aluminum and steel Hook Ends are then attached to the Drape Support with four steel rivets before final assembly. If there is only one component that sets our Drape Supports above the rest of the industry, it is our unique cast aluminum hook end. Each Hook End features a rugged steel steel hook cast into a solid aluminum end. They are universally recognized as being the best in the industry due to their strength and durability. They will last years longer than the plastic hook ends used by our competition. Telescoping Drape Supports feature our unique button lock system that allows the length of the drape support to be adjusted in precise increments. Fixed Length Drape Supports offer an economical alternative when every booth is the same size. We stock 8 Ft. and 10 Ft. Fixed Drape Supports for immediate shipment. Customs sizes are available upon request.

With the high cost of labor and the need to turn trade shows quickly our Storage Carts provide the winning edge. Each expo cart has been designed to reduce set up time and to protect your investment. Each features rugged welded steel frames to provide years of dependable service. To make moving your carts easier we feature Colson Casters exclusively. They are individually rated at 900 lbs.

Carts do not come painted. They are primed grey and ready to paint. Painting is available at an additional charge, but will extend the lead time. Please contact our sales department for more information.

Designed to fit pipe and drape bases. Heavy duty straps also allow for use as saddle bag. Comes with heavy duty center D-Ring. Velcro flaps on two sides and separate plastic bags for easy filling.

Banjo Cloth is an industry favorite because of its wide range of colors, low cost, and inherently flame retardant qualities. Based on its narrower width we recommend using four or five drapes per 10 feet of pipe.

Poly Premier is a knitted product with a linen look and a perfect choice for a more upscale looking trade show booth. It is available in all the most popular colors and dye lots are extremely consistent. We recommend using three drapes per 10 feet of pipe.

Cotton Velour offers a more theatrical look and is very popular as a backdrop or room divider. Black is standard, but other colors are available.

We offer a full line of pre-pleated table skirts to match our drape panels. Standard Table Skirt heights are 29" for 30" high tables and 39" for 40" counter high tables. However; we are able to make Table Skirts in any height you need up to 60".

The Expo Pleat Table Skirt is the industry standard for trade show use. It features a full look at and economical price. Web backing is standard and they are attached to wooden tables with staples. Velcro backing with Table Clips are available as an option.

Designed for the special demands of the convention and rental industry, the quality of our Polished Chrome Stanchions will be evident even after years of tough service. Every stanchion is manufactured from chrome plated steel and features our distinctive chrome top and universal ring. We offer Stanchion Roping in nylon velour over a soft flexible foam core in a host of popular colors. Every Stanchion Rope is shipped fully assembled with snap type Rope Ends attached. Roping Colors: Red, Burgundy, Black, Navy Blue, Royal Blue & Hunter Green