|
Print
|
Projection Screens |
| Scenery Projection Screens |
Our Scenery Projection Screens are designed for use in theatrical settings. We offer a range of screen materials, each with special technical properties to fit many different applications. All screens are designed for excellent color rendering and good contrast with a wide range of viewing cones. All screens are durable, washable and inherently flame retardant and should be viewed from the matte side to help minimize the unwanted effects of ambient light.
A finished screen is custom made to the size you specify - cut, heat-welded with vertical seams. Standard finishes include grommets on 12" centers, a pipe pocket, or hemmed edges. Other finishes and custom shapes are possible but may require additional charges and lead time.
Minimum order is 100 square feet. |
|
|
| Twin White - Front & Rear Projection |
|
Our most versatile screen. Its milky white color makes for equally bright images whether front or rear projected. This means that a designer can cross fade between front and rear projection unnoticed. The viewing cone on this screen is almost 180 degrees, meaning that nearly everyone in the audience will be able to see an undistorted image. Because the screen is light colored for front projection reflectance, ambient light will affect the image quality, so care should be exercised in lighting around the screen.
|
|
Twin White Screen - finished (55")
For Front and Rear Projection.
100 sq.ft. minimum
This screen uses 55" wide screen material and has heat welded seams every 55". Seams are vertical unless you specify otherwise.
|
$4.03 / Square Foot
(50002106S)
|
|
Twin White Screen - finished (86")
For Front and Rear Projection.
100 sq.ft. minimum
This screen uses 86" wide screen material and has heat welded seams every 86". Seams are vertical unless you specify otherwise.
|
$4.39 / Square Foot
(50002106W)
|
| Black - Rear Projection |
|
Best used in situations with high quantities of ambient light. The dark grey color comes magically to life with fine detail resolution when back lit with a STRONG (bright) image. The color makes the screen inconspicuous within the framework of a set, but its viewing cone is limited to 30 degrees off center. The direct light transmission is only 6%, but the excellent contrast between light and dark make for an image which appears substantially brighter. Black is particularly suited for ballet and opera where the dark surface absorbs the reflections of follow-spots from the floor.
|
|
Black Screen - finished (55")
For Rear Projection.
100 sq.ft. minimum
This screen uses 55" wide screen material and has heat welded seams every 55". Seams are vertical unless you specify otherwise.
|
$4.03 / Square Foot
(50002107S)
|
| Grey - Rear Projection |
|
Grey projection screen has many of the advantages of black screen while opening up the viewing angles to accommodate a wider audience. The color still helps blend the screen into the scenery, and provides true-to-life image color and clarity. The viewing cone opens up to 60 degrees, and the lighter color means higher light transmission, and therefore, a brighter image.
|
|
Grey Screen - finished (55")
For Rear Projection.
100 sq.ft. minimum
This screen uses 55" wide screen material and has heat welded seams every 55". Seams are vertical unless you specify otherwise.
|
$4.03 / Square Foot
(50002105S)
|
|
Grey Screen - finished (86")
For Rear Projection.
100 sq.ft. minimum
This screen uses 86" wide screen material and has heat welded seams every 86". Seams are vertical unless you specify otherwise.
|
$4.39 / Square Foot
(50002105W)
|
| Light Translucent - Rear Projection |
|
Slightly opaque, light grey screen with a variety of uses. For projection, it is best used in high ambient light situations, particularly in outdoor installations, because the extremely high light transmission of the screen allows the image to compete with bright ambient light. Care should be exercised in avoiding the line of sight between the viewer and the projector, however, due to the hot spot that would be seen because the screen is so translucent. Other uses for the light translucent screen are as bounce drops and diffusion materials.
|
|
Light Translucent Screen - finished (55")
For Rear Projection.
100 sq.ft. minimum
This screen uses 55" wide screen material and has heat welded seams every 55". Seams are vertical unless you specify otherwise.
|
$4.03 / Square Foot
(50002108S)
|
|
Light Translucent Screen - finished (86")
For Rear Projection.
100 sq.ft. minimum
This screen uses 86" wide screen material and has heat welded seams every 86". Seams are vertical unless you specify otherwise.
|
$4.39 / Square Foot
(50002108W)
|
| Front White - Front Projection |
|
Highly reflective, opaque material. Front white is best suited for those situations requiring the brightest image combined with the widest viewing angle. Because the reflectiveness (gain) is so high, this screen will pick up any ambient light. Therefore, care must be exercised in the lighting design to minimize bounce light.
|
|
Front White Screen - finished (55")
For Front Projection.
100 sq.ft. minimum
This screen uses 55" wide screen material and has heat welded seams every 55". Seams are vertical unless you specify otherwise.
|
$4.03 / Square Foot
(50002106S)
|
|
Front White Screen - finished (86")
For Front Projection.
100 sq.ft. minimum
This screen uses 86" wide screen material and has heat welded seams every 86". Seams are vertical unless you specify otherwise.
|
$4.39 / Square Foot
(50002106W)
|
|
|
