I. Weiss.com
ABOUT US PORTFOLIO SPECIALS NEWS CONTACT ORDERING RESOURCES
ETCP recognized

Dance Floor

Print
Maintenance | Warranty
Maintenance
CLEANING and MANTAINING your Rosco Floor

The regular cleaning of your dance floor is important to the overall life of your floor. The floor should be swept and mopped at least 3 times a week. In touring applications the floor should be swept and mopped everyday. Do not use any cleaner with ammonia in its formula, as the ammonia will alter the vinyl making the surface of your floor slippery. Prior to the mopping, the floor should be swept clean with a soft push broom. A corn broom or other stiff bristle broom may leave scratches on the floor surface.

For regular cleaning Rosco All-Purpose Cleaner is the specified cleaning product for all Rosco dance floors. The water temperature should be warm but not hot. For light duty cleaning, add 2 ounces of Rosco All-Purpose Cleaner to 1 gallon of water, mop and let dry. For moderate to heavy dirt build up on the floor add 8 ounces Rosco All-Purpose Cleaner to warm water, mop, rinse lightly with clean cold water, and let dry. If there is gummy residue from floor tape, apply Rosco All-Purpose Cleaner full strength to a soft cloth and rub on the build up (wear rubber gloves to avoid skin contact). Afterwards, rinse the area with clean water and let dry.

If the floor has either been in storage or not cleaned for a period of time use Rosco Heavy Duty Cleaner. Rosco Heavy Duty Cleaner is a floor stripper as well as a cleaner. Using Rosco Heavy Duty Cleaner will remove all waxes and any excessive dirt that has built up the floor. Add 4 ounces of Rosco Heavy Duty Cleaner to 1 gallon warm water and mop. After cleaning rinse the floor with clean cold water and let dry. To remove difficult stains or spills, apply Rosco Heavy Duty Cleaner full strength directly to a soft cloth, rubbing the cloth on the stain (wear rubber gloves to avoid skin contact). Afterwards, rinse the area with clean water and let dry.

Warranty
R o s c o F l o o r W a r r a n t y

All Rosco Floors, including the Rosco SubFloor with Wave Lock™ Technology, are guaranteed by Rosco Laboratories, Inc. to be free from manufacturing defects in both material and workmanship. Rosco recommends inspection of all flooring upon arrival and prior to installation. If a defect is discovered the customer must notify Rosco directly as soon as possible after the defect is discovered. A representative will inspect the complaint as soon as possible after it is received.

If Rosco Laboratories, in its sole discretion, determines the material to be defective within five years of purchase (three years for Reversible Dance Floor), it will supply sufficient material (comparable grade and color) to replace the defective material. Rosco Laboratories, Inc. will not bear any replacement costs or original installation costs.

This guarantee is in lieu of all other expressed guarantees. It covers the original purchaser only and is not transferable. Complaints caused by faulty installation, obvious abuse, improper maintenance (including use of non-specified cleaners and polishes), normal wear and tear, burns, gouges, cuts or indentations caused by improper floor protectors and furniture rests, will not be considered a just claim.

Problems caused by moisture, hydrostatic pressure, excessive alkali in a concrete slab, cracks in concrete slab, the use of adhesives, cleansers or finishes other than those recommended by Rosco Laboratories, Inc., improper underlayments or uneven wood substrates and other uses contrary to Rosco Laboratories, Inc.’s recommendations are cause to void this guarantee.

Maintenance | Warranty

I. Weiss
2-07 Borden Avenue, Long Island City, NY  11101
(voice) 888-325-7192   (fax) 718-482-9410
Contact Us

Join the I. Weiss team!
Click here for available positions.

This web site and all contents are © I. Weiss, unless otherwise noted. All rights reserved.