|
Print
|
|
|
Sure Clamp
Grip range of 1-1/4" to 2".
WLL = 176 lbs
|
$42.00 / Each
(850 78020 0000)
|
|
Loose Pin Hinge - 1.5"
Typically used to attach scenery flats.
Hinge with removable pin - is used when scenery has to be taken apart for storage or transportation.
|
$13.30 / Box (Box of 12)
(850 73100 0001)
|
|
Loose Pin Hinge - 2"
Typically used to attach scenery flats.
Hinge with removable pin - is used when scenery has to be taken apart for storage or transportation.
|
$14.80 / Box (Box of 12)
(850 73200 0002)
|
|
Ceiling Plate with Ring
Typically used to attach scenery flats.
Lines are cable are more easily attched with this device affixed to the ceiling of a box set. May also be used to hang relatively lightweight scenery.
|
$15.30 / Each
(850 76220 0000)
|
|
Top Hanger Iron
Affixed to the top of a scenery flat for hanging.
|
$6.00 / Each
(850 76310 0000)
|
|
Bottom Hanger Iron
Fits under the bottom memeber of a scenery flat.
Usually secured parallel to the Top Hanger Iron.
|
$7.10 / Each
(850 76320 0000)
|
|
D- Ring Plate with Ring
The floor plate bolts to the stage floor for tying off lines.
|
$3.00 / Each
(850 76410 0000)
|
|
Stage Screw
Goes directly into the wood stage floor.
|
$4.70 / Each
(850 74200 0000)
|
|
Steel Stage Screw
3/8" diam. - heavy steel with zinc plating.
Used with Stage Plug.
Used when used several times in the same place, or where exceptional holding power is needed. Drill a 9/16" hole, screw the stage plug into the floor with a wide straight blade screwdriver, then fit the screw into the plug.
|
$5.10 / Each
(850 74100 0000)
|
|
Stage Plug
Use with Steel Stage Screw.
For 9/16" diam. hole.
Drill a 9/16" hole, screw the stage plug into the floor with a wide straight blade screwdriver, then fit the screw into the plug.
|
$5.00 / Each
(850 74150 0000)
|
