iWeiss Theatrical Solutions       https://www.iweiss.com
[Skip to Content]


iWeiss Channel Track Hardware

 

Black Single Carrier

  • 2 Neoprene-tired sealed ball bearings wheels riveted to black nylon injected body  
  • Swivel hook and 6” trim chain for curtain attachment & leveling
  • Carrier load rating at 12” center spacing: 25lbs

 

Buy Now

 

Black Master Carrier

  • 4 neoprene-tired sealed ball bearings wheels riveted to steel body
  • 2 Clamps provided for securing operating line. 
  • 1 pair required for overlapping tracks

 

Buy Now

 

 

Double End Pulley

  • 4” Diameter Nylon sheaves with shielded ball bearings
  • Steel housing clamps to track
  • Chain bracket for offstage tie-off of curtain edge
  • 3/8” rope groove
  • Zinc Black Finish

 

 Buy Now

Single End Pulley

  • 4” Diameter Nylon Sheave with shielded ball bearings
  • Steel housing clamps to underside of track
  • Chain bracket for offstage tie-off of curtain edge
  • 3/8” rope groove
  • Zinc Black Finish 

 

Buy Now

 

Black 8” Double End Pulley

  • 8” Diameter Nylon Sheaves with sealed ball bearings
  • Steel housing clamps to underside of track
  • Chain bracket for offstage tie-off of curtain edge
  • Grooved for up to ½” operating line
  • Zinc Black Finish

 

Buy Now

 

Black 8” Single End Pulley

  • 8” Diameter Nylatron GS sheave with sealed precision ball bearings
  • Heavy-duty steel housing clamps to underside of track
  • Chain bracket for securing offstage curtain edge
  • Grooved for up to ½” operating line

 

Buy Now

 

 

Splice

  • Formed steel enclosure brackets to align and lock multiple track sections for longer runs
  • Zinc Black Finish

 

Buy Now

Clamp Hanger

  • Formed steel enclosure brackets clamp top side of track
  • Adjusts for various positions
  • Zinc Black Finish

 

Buy Now

 

Adjustable Floor Block

  • 4” Diameter Nylon Sheave
  • Shielded ball bearings
  • In steel housing for floor mounted installation
  • 9” Vertical adjustment
  • 3/8” rope groove
  • Zinc Black finish

 

Buy Now

8" Adjustable Floor Block

  • 8” Diameter Nylon sheave with sealed ball bearings
  • In steel house for floor mounted installation
  • 9” Vertical adjustment
  •  ½” rope groove
  •  Zinc black finish

 

Buy Now

 

End Stop

  • Compression fitting typically installed at tracks end to prevent carrier moving beyond end of track
  • Tapped and formed steel U-Shaped
  • 5/16” eye bolt for ease of installation of tie-off of curtain end
  • Black finish

 

Buy Now

Center Pipe Support

  • Creates hanging position of the center of two track overlapping each in a bi-part assembly
  • Form steel plate with mounting holes
  • Black finish

 

Buy Now

 

Backpack, 1/2" Rope

  • Assembly of a single plate with (2) rubber washers
  • The assembly creates an pull off effect of the curtain in moving into storage position
  • Supplied with rubber washers
  • Black finish

 

Buy Now

Backpack, 3/8" Rope

  • Assembly of a single plate with (2) rubber washers
  • The assembly creates an pull off effect of the curtain in moving into storage position
  • Supplied with rubber washers
  • Black finish

 

Buy Now

 

Ceiling Splice

  • Two form steel members to create a hold splice with track is directly mounting to along its top surface
  • Formed steel plate with through bolts for installation
  • Plates and hardware black finish

 

Buy Now

Overlapping Master Carrier

  • Allows curtain to overlap each other on a single track section
  • Neoprene-tired shield ball bearing wheels riveted to formed steel body with swivel hook and trim chain
  • Provided with (3) trim chains for curtain tie-off
  • Black finish

 

Buy Now

QR Code