iWeiss Theatrical Solutions       https://www.iweiss.com
[Skip to Content]


iWeiss I Beam Track Hardware

 

Single Carrier

  • Neoprene-tired shielded ball bearing wheels riveted to formed steel body with swivel hook and trim chain 
  • Plastic glide strips for reduction in noise & friction
  • Supplied with 2 rubber bumpers
  • Carrier load rating at 12” center spacing: 8lbs
  • Zinc Black Finish 

 

Buy Now

Master Carrier

  • 2 Neoprene-tired shielded ball bearing wheel assemblies with swivel hook and trim chain pivot on formed steel body
  •  Supplied with 2 clamps for securing operating line 
  • 1 pair required for overlapping tracks
  • Carrier load rating at 12” center spacing: 8lbs
  • Zinc Black Finish

 

Buy Now

 

Double End Pulley

  • 4” Diameter Nylon sheaves grooved for 1/4” diameter rope with shielded ball bearings
  • Steel housing clamps to track 
  • For use with bi-part and single draw track systems
  • Zinc Black Finish

 

Buy Now

Single End Pulley

  • 4” Diameter Nylon Sheave grooved for ¼” diameter rope with shielded ball bearings
  • Steel housing clamps to track
  • For use with bi-parting tracks.
  • Zinc Black Finish

 

Buy Now

 

Splice

  • Aluminum plates align and bolt top track sections together
  • Track must be straight at joint.
  • Zinc Black Finish

 

Buy Now

Clamp Hanger

  • Formed steel brackets clamp to track 
  • Adjusts for various positions
  • Load rating for track varies based on install spacing *see chart
  • Zinc Black Finish 

 

Buy Now

 

Ceiling Hanger

  • Steel plate mounts flush to ceiling
  • Track clamps to bracket with offset clips
  • Adjustable mounting for various locations
  • Zinc Black Finish
  • Load rating for track varies based on install spacing

 

Buy Now

 

Outside Idler

  • Formed steel bracket with single ball bearing pulley for guiding of operation cord
  • Used along the outside of the single pulley end of track systems
  • Black finish

 

Buy Now

 

Single Spindle

  • Form steel bracket with single ball bearing shaft for guiding of operation cord
  • Used along the inside single pulley end of track systems
  • Black finish

 

Buy Now

Double Spindle

  • Formed steel housing contains two ball bearing guides for operating line to follow curve
  • Mount to inside and outside of curve on double end pulley section of track for single and bi-parting draw systems.
  • Zinc Black Finish 

 

Buy Now

QR Code