iWeiss Theatrical Solutions       https://www.iweiss.com


Mega Couplers

Mega Couplers

The Mega Coupler's solid nut has tabs that won’t break off. Mega-Coupler uses standard 1/2 inch by 1-1/4 inch long hex head grade 8 bolts to secure your load. Has industry compatible 14 mm thick base.

The Swivel Coupler will fasten from 1-1/4” pipe (1.660” OD) to 2.050” OD truss tube. The Swivel-Coupler has the wide wing nuts for fastening the clamp to the pipe or tube. The Swivel Coupler can be locked into a 90 degree fixed coupler by adding a 7/32” x 2” spirol pin.

The Mega-Burger's quick flip handle instantly locks on 2” truss tube or 1-1/2” schedule 40 pipe. Preset clamp for your pipe size. Releases with a pull on the safety enclosed trigger.

Mega-Coupler, Aluminum Finish
Safe Vertical Working Load = 1100 lbs
Mega-Coupler, Black Anodized
Safe Vertical Working Load = 1100 lbs
Mega-Coupler, w/Eye Nut, Aluminum Finish
Safe Vertical Working Load = 1100 lbs
Mega-Coupler, w/Eye Nut, Black Finish
Safe Vertical Working Load = 1100 lbs
Mega Coupler, Swivel, Aluminum
Mega Coupler, Swivel, Black
Mega-Coupler, 90 Degree, Aluminum Finish
Safe Vertical Working Load = 1100 lbs
Mega-Coupler, 90 Degree, Black Finish
Safe Vertical Working Load = 1100 lbs
Mega Burger Half Coupler, Mill Finish - fits 2" tubing
Mega Burger Half Coupler, Black Anodized - fits 2" tubing
Mega Coupler Pipe Adapter for 1.5" pipe - Aluminum Finish
Safe Working Load Limit = 1100 lbs

The Pipe to Coupler Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes through the side to run power and signal cables inside the vertical pipe. The Pipe to Coupler Adapter attaches a standard threaded 1-1/2" pipe (1.9" OD) to a Mega-Coupler. There are two interlocking tabs to keep the adapter from rotating. The Adapter is fastened to the Mega-Coupler with a 1/2"-13 tpi by 1" long bolt and a jam nut. There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted.

Mega Coupler Pipe Adapter for 1.5" pipe - Black Anodized
Safe Working Load Limit = 1100 lbs

The Pipe to Coupler Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes through the side to run power and signal cables inside the vertical pipe. The Pipe to Coupler Adapter attaches a standard threaded 1-1/2" pipe (1.9" OD) to a Mega-Coupler. There are two interlocking tabs to keep the adapter from rotating. The Adapter is fastened to the Mega-Coupler with a 1/2"-13 tpi by 1" long bolt and a jam nut. There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted.